All Products (Total 217 Products)
FOT-800 Series www.fibercan.com.cn General Specification Port for data transmission USB - Type C Operating/ Storage Temperature -10℃ ~ 50℃ / -20℃ ~ 70℃ Power supply Lithium Battery ; USB Type C Dimensions (L*W*H) 160mm * 80mm * 18 mm Ultra-thin portable design 4.95-inch capacitive multi-touch screen Build-in...
Optical Power Meter FPM-600 Series❖ Ultra-thin portable design ❖ Auto Wavelength-identification ❖ Modulation Frequency Detection ❖ Up to 1000 testing results storage ❖ Auto power-off , battery indicator ❖ LCD display with back-light ❖ USB port for data transmission ❖ Build-in 10mW VFL module ❖ RJ45 Cable tester and...
Optical MultiMeter FLM-620 Series Ultra-thin portable design Auto Wavelength-identification Modulation Frequency Detection Up to 1000 testing results storage Auto power-off , battery indicator LCD display with back-light USB port for data transmission Build-in 10mW VFL module RJ45 Cable tester and...
A.JDC series module connector set signal and power in one, the product uses the world's most advanced crown spring jack as the contact part, so it has high dynamic contact reliability, flexible installation, can achieve blind mating. B. Except the 20# contact plated gold, the other contacts are silver-plated. The...
1. Insulator, high current through terminal block products are basically threaded connection, the connection is reliable and cost-effective2. The products are used in intelligent high-frequency switching power supply, electric power supply, railway power supply, large LED power supply, and uninterruptible power...
1.Material: Housing: PA-66, UL94-V0 black Contact: copper alloy, silver 3um(min) Seal: Silicone rubber2. Rated voltage: 600V DC3. Withstand voltage: 1500V DC4. Rated current: 80A, 60A, 35A5. Insulation resistance: 3000≥MΩ6. Mechanical life: 500 times Min7. Operating temperature: -40~125Ω
Automotive wiring harnesses are responsible for the power supply and information transmission of the various electrical devices in the vehicle, so it needs to be highly reliable. The cable of the wiring harness have good insulation performance and high temperature resistance and corrosion resistance to ensure that it...
This kind of Hybrid Adapter can covert SC type to LC type .The plug type of this Hybrid Adapter is male-to-female. Our Hybrid Adapter is excellent performance and is fully compatible with all LC connector and SC adaptor. Performance Specifications:Mechanical specificationsMechanical Diagram(unit:mm)Test procedure...
Product OverviewFibercan Optical offers the consumer a full range of LC adaptors for both PC and APC applications. These adaptors are mainly applied for telecommunication and networking. Our fiber optic adaptors are available in a series of colors and their inside sleeves can be made by phosphor bronze, zirconia or...
Product Overview Fibercan Optical offers the consumer a full range of SC Foot-print MPO adaptors for both PC and APC applications.These adaptors are mainly applied for telecommunication and networking.Orientationkey up-key upkey up-key downOptical specifications Environment specificationsOutline dimensionMechanical...
Product Overview Optical specificationsEnvironment specificationsMechanical specificationsMechanical Diagram(unit:mm)Characteristics High precision MTP Connector Provide high density mounting in any optical equipment Availble for SM & MM Excellent optical performance Packaging,Labelling and shipping Marks Special...
ADSS ADSS cable is used for high-voltage transmission lines, using the power system transmission tower rod, the whole cable is non-metallic medium, self-bearing suspension on the power tower electric field intensity of the smallest position. It is applicable to the established high-voltage transmission lines, because...
GYFXTZSThe structure of GYFTZS (non-metallic reinforced, loose strand, steel low smoke halogen-free sheathed communication outdoor optical cable) is that single-mode or multi-mode optical fiber is sheathed in high modulus plastic filled waterproof composite loose tube. At the center of the cable is a non-metallic...
1. Cable introduction1.1 Cross-section1.2 Cable designThe structure of GYFXTY (non-metallic glass fiber reinforced component, coupled with two parallel FRP reinforced components, low smoke and halogen-free sheathed outdoor communication optical cable) optical cable is filled with single-mode or multimode optical fiber...
1. Cable type: GJXFH-2B6a12. Profile view:3. Specification:
1.1 Cross-section1.2 Cable designThe structure of GYFXTY (non-metallic glass fiber reinforced component, coupled with two parallel FRP reinforced components, low smoke and halogen-free sheathed outdoor communication optical cable) optical cable is filled with single-mode or multimode optical fiber sheath using...
1. Cable structure2. Cable descriptionThe structure of GYFTY (non-metallic reinforced, loose sleeve layer, stranded filling type, polyethylene sheathed outdoor communication optical cable) optical cable is that single-mode or multi-mode optical fiber is sheathed in a waterproof composite loose sleeve made of high...
Application●Optical Telecommunication System, LAN , Optical fiber Communication System ●Optical fiber testing machine /test equipment ●CATV Networks, Fiber optical transducer ●Optical fiber broadband access network, FTTH access network ●Optical fiber ODF,Rack and wall mount fiber optical distribution...
Product OverviewFiber access termination box is able to hold up to 2 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing ,distribution, storage and cable connection in one solid protection boxFeatures 1.Total enclosed...
Product OverviewFibercan SC Pre-Assembled connector is designed to simplify the deployment of where fiber required. It provide a tech-friendly field assembled connector that snaps together in seconds without jeopardizing fiber protection and optical reliability.Fibercan SC Pre-Assembled connector assemblies are...
Product OverviewFibercan LC Blowing connector is designed to simplify the deployment of where fiber required. It provide a tech-friendly field assembled connector that snaps together in seconds without jeopardizing fiber protection and optical reliability.Fibercan LC Blowing connector assemblies are factory terminated...
Product overview1、This closure can be connected through different installation ways such as cross arm hoop,aeriel, underground,wall-mounting etc. 2、Connectors and fibers can be stored in the closure in order,and the number of splicing trays can be adjusted according to the number of fibers. 3、The closure achieves the...
Technical datasheetProduct viewCable structure